New Ali Bendy Bull for WPC/SPC.
The Ali Bendy Bull for WPC/SPC Profile uses a base material of aluminium for a high quality installation. Video Below.
The Ali Bendy Bull is an attractive stair nosing for curved/curtail treads and straight steps between 22mm" - 25mm" thickness.
The Ali Bendy Bull for WPC/SPC is available for WPC 8mm and SPC 5mm & 6.5mm.
Overlap option available for use where an expansion gap is required, maximum expansion tolerance up to 6mm. Please Note the Overlap option CANNOT be bent.
See our fitting video on Stairrods YouTube channel for Bendybull full install, Bendybull light commercial and Bendybull with WPC/SPC
Pre-drilled/countersunk at 2 61/64" centres and supplied with Spax-M self-drilling screws (do not pre-drill). Requires a T20 star bit.
Use a dim strip or strip of vinyl for an exact measure.
We advise the use of a non expanding cartridge adhesive. Flex as a secondary fixing.
We advise against mitring the Bendybull as it will produce a sharp corner. Consider Ali Wrap Nosings as an alternative.
Consider 4mm ply with thinner SPC.
For steep steps consider 4mm ply rather than 6mm to drop the height of the nosing.
Finishes - Ali Brass, Ali Chrome, Ali Black and Ali Antique
Lengths - 48" & 72”
Profile - Flush or Overlap
Shipping and Delivery Information
Shipping - Free Shipping on orders over $400.
$50 shipping for orders under $400.
Delivery - 7-10 business days.
